Support Home



Search
Support & Downloads
Networking Connectivity
Token Ring Adapters
Windows NT* NDIS Driver Does Not Load

Symptom:
Windows NT* NDIS driver does not load. Error message: "OcTk1601 : Could not allocate the resources necessary for operation" shows in the Event log when the driver tries to load. Other errors will follow because the driver does not load.

Solution:
Adjust the network settings in the adapter configuration:

  1. Open the Control panel window.
  2. Choose the Network icon.
  3. Highlight adapter, and choose Configure.
  4. Change Receive Buffers to 18.
  5. Change Transmit Buffers to 12.
  6. Change Max Frame Size to 4k.
  7. Save and Exit.

This applies to:
TokenExpress™ 16/p Adapter
TokenExpress™ EISA 16/4 Adapter
TokenExpress™ MCA Adapter

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW. For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-016349
Date Created: 13-Oct-2004
Last Modified: 23-Oct-2006
Back to Top