|
The Intel® Thermal Solution XTS100H is optimized for the Intel® Core™ i7-2600K, the Intel® Core™ i7-875K, the Intel® Core™ i5-2500K, and the Intel® Core™ i5-655K processors to enable enhanced performance and is designed to exceed thermal requirements, even when set to quiet mode operation. This product is also compatible with all socket LGA1155 and socket LGA1156 Intel® desktop processors.
Features
- Optimized for Intel's Unlocked Processor
With the introduction of the new Intel® Core™ i7-2600K, Intel® Core™ i7-875K, Intel® Core™ i5-2500K, and the Intel® Core™ i5-655K processors, Intel® is introducing unlocked processors to the mainstream that allow for more stability and more flexibility.
- Selectable fan speed control
Quiet Mode and Performance Mode are switch selectable.
- Acoustics
Idle CPU acoustics under 20 dBA at 800 RPM. Maximum acoustics under heavy load is below 45 dBA at 2600 RPM
- Polished CPU contact surface
Three heat pipe solution with six vertical rising pipes offers optimal heat transfer
- Blue LED Fan
- Installation Instructions
Visit the Intel® Core™ i7-980X & i7-990X processor extreme edition installation video page for a short installation video.
| Note |
This installation video refers to the Intel® Core™ i7-980x processor and E75476-003 thermal solution installation. These instructions are applicable to the XTS100H thermal solution and supported processors due to the similarity of the two fan-heatsinks. | |
Specifications
| Model Number |
XTS100H |
| Thermal Solution Type |
Active |
| Compatibility |
Intel LGA115x |
| Warranty |
3 years |
| Dimensions (LxWxH) |
95mm X 95mm x 130mm |
| Bearing type |
Rifle Bearing |
| Rated Speed |
800 RPM / 2600 RPM |
| Noise Level |
20 dBA / 45 dBA |
| Weight |
885g |
| Heat pipes |
3 (copper) |
| Rated Voltage |
12V |
| Start Voltage |
7V |
| Rated Current |
0.9A |
| Input Power |
10.8W |
| Connector |
4-pin |
| Fan Control |
PWM and manual | |
Operating System:
This applies to:
| 
