The GSM phone is attached to the Xircom® CompactCard Modem 56 Global Access with a Xircom GSM Connection Kit.

1. With the modem inserted into the Pocket PC, select "Start" --> "Settings" --> "Connections," and then select "Modem" icon.

2. The Modem Connections screen will appear. Select "New Connection..."

3. In the Make New Connection window, enter a name for the connection and select the Xircom modem.

4. Select "Advanced..." and enter any additional information you may need for the connection on the TCP/IP tab and Name Servers tab.
   
   Note: Consult with you ISP or network administrator for this information. In most cases you may not need to configure this.
   Click "OK" to exit.

5. On the Make New Connection screen, click "Next," enter the phone number that you would like to dial, and then click "Next."

6. Uncheck the "Wait for dial tone before dialing" box, click "Finish."

1. Connect the GSM Connection Kit to the modem and the GSM cellular phone.
   
   Note: Make sure the phone is receiving a data signal. You may have to contact you cellular phone provider to enable data services for the phone. A "D" or equivalent may appear on the display of the phone. Make sure the signal strength is sufficient and that the phone has enough battery power for your call.

2. To place the call, select "Start" --> "Programs," and then click the "Connection" icon.

3. On the Connections window, click the icon with the name you gave your modem connection in Step #2 above.

4. The Connect To window will appear. Enter your User name and Password.
   
   Note: If you are dialing from home and do not need to use a "9" to access an external office line, change the option in the "Dial from:" box to Home. If you phone system does require you to dial "9", leave the setting at Work.

5. Click the "Connect" button. The status screen should report that the modem is dialing, authenticating and that it has connected.

This applies to:

XircomŪ CompactCard 56K GlobalACCESS Modem Adapter (CFM56G)