If you are using Windows* 95, Windows* 98, Windows* Me, or Windows NT* 4.0:

1. Click Start, click Run, and type Hypertrm in the Open box, and then click OK.

2. Type Test in the Name box and click OK.

3. Select your Xircom modem in the Connect using box.

4. Enter 12345 in the phone number box and click OK.

5. In the Connect window, click Cancel. The Terminal screen (white screen) then appears.

6. Type ATI3 and press ENTER. The firmware version will be listed on the end of the line that is displayed.

Note: In some cases, you may not see what you are typing. Typing ATI3 and pressing ENTER will still work even though you do not see what you are typing.

If you are using Windows* 2000:

1. Click Start, point to Settings and click Control Panel.

2. In Control Panel, double-click Phone and Modem Options.

3. In the Phone and Modem Options box click on the Modems tab.

4. Highlight the Xircom modem and click Properties.

5. Click the Diagnostics tab then click Query Modem.

6. In the lower window you will see several AT commands. Scroll down to ATI3. The firmware version will be listed on the end of the line of the Response' of ATI3.

This applies to:

XircomŪ 10/100 Network+Modem 56 PC Card Adapter (XEM5600)