Firmware Upgrade Program Not Finding Modem
If you are running fax software, it may be necessary to turn the automatic answer feature off.
The network connection is slow, unreliable or not made when using the CE2, CEM28, CEM33, or CEM33i in Windows* 2000
The built-in Windows* 2000 drivers require that the cable type keyword be set properly.
Xircom drivers are not available for the CE2, CEM28, CEM33 or CEM33i in Windows 2000. However, drivers for these cards are included with Windows 2000. These built-in drivers are not supported by Xircom.
The Cable Type setting in these built-in drivers is "Auto " by default. It is some times necessary to set this cable type to Twisted Pair or Coax, whichever is appropriate. This tends to be an issue on machines with an Intel® Pentium® III class (or faster) processor.
Note: Xircom does not plan to write new drivers for these cards for Windows* 2000.
This applies to: