|
When using the CE as a Novell server, it is recommended that you run CECFG.EXE DRIVER=ODI with the valid parameters such as INT and MEM values in the NET.CFG. CECFG.EXE MUST be executed prior to executing SERVER and loading the .LAN driver. If you do you will not attach to the server nor will it show up on the network when using SLIST.
Also make sure the frames loaded are binding to the CE LAN adapter. Use MONITOR and use LAN INFORMATION, or type CONFIG at the SERVER CONSOLE PROMPT (IE: ":") to see if the frames MATCH the workstation's NET.CFG.
Lastly, since INT=10 is not a valid interrupt when loading the .LAN driver, DataBook machines will not work.
This applies to:
| 
