|
The following are configuration test results for the Fujitsu*
LifeBook* 635T with the CBE using the 16-bit ODI and NDIS drivers
under Windows* 95 OSR2.
Windows* 95 Retail version was not tested, but the configuration
below should work in that environment using the manual load option.
The driver release v1.20 was used for this testing.
16-Bit ODI / NDIS Drivers
-- INT 10
-- I/O Port 320
-- MEM D2000
-- Laptop BIOS is v1.07
Access BIOS at boot by pressing the F2 key. The BIOS settings
are PCIC and CardBus (both work). The PC Card setting is
located under:
Advanced,Integrated Peripherals, PC
Card.
Note: In this configuration, the driver would load only if the
laptop was cold booted.
The Installer Utility completed successfully when using the
NetWare* selection.
Windows 95 OSR2
-- INT 10
-- MEM 03040000-0304007F
-- MEM 03000000-0303FFFF
-- I/O 0400-047F
These resources were assigned by default. Cold boot was required
for the driver to load.
This applies to:
| 
