|
For information on how to connect and use the CLI, see the Using the Command Line Interface document.
clrscr
Use the clrscr command to clear the screen.
Syntax Description
This command has no arguments or keywords.
download
Use the download command to enter download mode for reading code images from a TFTP server and programming it to flash memory. Refer to the Upgrading the Elite Gateway* document for detailed information on how to upgrade the system software.
Syntax Description
This command has no arguments or keywords.
Note: This command is available from the serial interface. It is not available from Telnet unless the TFTP loader is version 3.00 or higher.
help
The help command lists the top-level commands.
Syntax Description
This command has no arguments or keywords.
ping
The ping command sends Internet Control Message Protocol (ICMP) echo request packets to another node on the network.
ping host_ip_addr
ping -s host_ip_addr count/timeout
Syntax description
| -s |
Causes ping to send one datagram per second, printing one line of output for every response received. |
| host_ip_addr |
The IP address or IP alias of the host. |
| count |
(Optional) The number of packets to send. |
| timeout |
(Optional) Timeout value for the ping in milliseconds. |
This applies to:
| 
