LOCATION OF DRIVER: \NDIS\E100.DOS
SAMPLE CONFIGURATION FILES
PROTOCOL.INI (may contain)
DriverName = PROTMAN$
Drivername = netbeui$
Sessions = 6
NCBS = 12
Bindings = "E100DOS_NIF"
LANABASE = 0
Drivername = E100$
Several network operating systems use a standard 2.0.1 version NDIS
driver to talk to the network adapter. The Intel® EtherExpress PRO adapter's
NDIS driver conforms to Microsoft's 2.0.1 NDIS specification. The NDIS
subdirectory on the EtherExpress PRO/100 disk contains the files needed
to use the adapter card with one of these operating systems.
||NDIS driver for DOS workstations.
||NDIS driver for servers & OS/2 workstations.
A fragment of the general PROTOCOL.INI file. This fragment contains
information specific to the EtherExpress PRO/100 adapter. You'll need to
add this fragment to the general PROTOCOL.INI file.
The Extended Network Information file (NIF) that IBM OS/2 uses during
its installation process.
The standard NIF file used with Microsoft LAN Manager installations.
Other network operating systems may use these during their installation.
If needed, these files (one for DOS, one for OS/2) are located in the
This applies to: