|
Symptom(s):
When displaying iSCSI Boot Priority using Intel® PROSet for Windows* Device Manager, the primary or secondary port is missing from the display. Each time you close the display and open it, a different port might be missing.
Cause:
After removing or disabling some 10 Gigabit Ethernet ports configured as primary iSCSI Boot Priority, then installing or enabling the previously removed or disabled adapter may cause the described symptom.
Solution:
- Open the iSCSI Boot Priority using Intel PROSet for Windows Device Manager.
- Set all ports to "Disabled".
- Restart Windows.
- Open the iSCSI Boot Priority using Intel PROSet for Windows Device Manager
- Set desired ports to primary and secondary.
.
This applies to:
| 
