System Compatibility:

• PCI-X 1.0a and PCI 2.3

• LC Duplex Multi-Mode Fiber Connector

• 10Gbps

• PCI: INTA

• No Link to LAN: Power = 8.392W (3.3 V = 1.678A, 5.0V=.571A)
• Full-duplex Stress Test: Power = 9.072W (3.3V = 1.664A, 5.0V =.587A)

• Flash: 1Megabit (128Kbtyes X 8bits)
• EEPROM: 1Kbits (64 Words of 16 bits each)

• Board Dimensions: PCI card short form factor: (3.575inches X 6.60 inches, measured without the bracket)

• 4 LEDS: Tx, Rx, Link, SDP (software definable pin)

• Operating Temperature

  Board Operating Temp Limits: 0 to +70C

This product has been tested, the results have been reviewed and approved, and the adapter is compliant to the following regulatory standards:

• FCC Class A Radiated and Conducted Emissions (USA and Canada)
• FCC Class A Radiated and Conducted Emissions (USA and Canada)
• VCCI Class A Radiated and Conducted Emissions (Japan)
• BSMI Class A (Taiwan)
• EN55022 (CISPR 22) Class A Radiated and Conducted Emissions (European Union)
• C-Tick AS/NZS 3548 Class A Radiated and Conducted Emissions (Australia and New Zealand)
• EN55024 (CISPR 24) Immunity (European Union)
• EN60950/IEC60950 Safety (European Union)
• IEC 825-1 Laser Safety
• IEC 825-2
• IEC 825-4
• CDRH 21CFR1040
• CE
• RRL (Korea)
• GOST (Russia)
• UL 60950
• CSA 60950-00
• Declaration of materials per EIA recommendations

This applies to:

Intel® PRO/10GbE SR Server Adapter