Networking Connectivity
Intel® PRO/10GbE LR Server Adapter
Technical Specifications

System compatibility:

  • PCI-X 1.0a and PCI 2.3
Media (cable) connector:
  • SC Duplex Single-Mode Fiber Connector
Data rate mode:
  • 10Gbps
Interrupt levels:
Power consumption:
  • No Link to LAN: Power = 10.47W (3.3 V = 1.273A, 5.0V=1.254A)
  • Full-duplex Stress Test: Power = 12.27W (3.3V = 1.472A, 5.0V =1.482A)
  • Flash: 1Megabit (128Kbtyes X 8bits)
  • EEPROM: 1Kbits (64 Words of 16 bits each)
  • Board Dimensions: Full size PCI card form factor: (4.2inches X 12.283 inches, measured without the bracket)
Diagnostic LED:
  • 4 LEDS: Tx, Rx, Link, SDP (software definable pin)
Environmental testing:
  • Operating Temperature:
    Board Operating Temp Limits: 0 to +55C <2 C/min
    Tested at : -5C to +60C <2 C/min
  • Non-Operating:
    Non-operating Temp Limits: -40C to +70C <2 C/min
Certifications (regulatory testing):
  • FCC Class A
  • UL 1950, CSA 950,
  • CE
  • GOST (Russia)
  • CNS13438 Class A (Taiwan)
  • VCCI Class A Certificate (Japan)
  • EN55024 (CISPR 24)
  • EN55022 (CISPR 22)
  • EN60950/IEC60950 safety

This applies to:

Intel® PRO/10GbE LR Server Adapter

Solution ID: CS-008403
Last Modified: 30-Sep-2014
Date Created: 18-Jan-2004
Back to Top