The following lists the configuration test results of the Xircom® CardBus Ethernet 10/100 Adapters (CBE, CBE2, RBE, and R2BE) on some Toshiba* Tecra* and Protege* Series laptops.

• Protege 650*
  
  --DOS test completed
  --CBEODI.COM v1.4
  --No resources listed
  
  
• Protege 660* CDT
  
  --BIOS v6.30
  --Windows* 95 OSR2 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0400-047F
  --MEM 10C0000-10C007F
  --MEM 1080000-10BFFFF
  
  Note: In system devices, the Memory and I/O ranges show up as being used by Toshiba* ToPic* CardBus Controller.
  
  
• Tecra 500*CS/CDT
  
  --DOS test completed
  --CBEODI.COM v1.4
  --No resources listed
  --Windows* 95 test completed
  --CBE.SYS v1.12
  --No resources listed
  
  
• Tecra 720* /1.2
  
  --BIOS v5.80
  --DOS test completed
  --CBEODI.COM v1.12
  --No resources listed
  --Windows* 95 test completed
  --CBE.SYS v1.12
  --Manual Load
  
  Resources:
  
  --INT 10
  --PORT F100-F17F
  --MEM C0000-C3FFF (Both slots)
  --Windows* 95 OSR2 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0400-047F
  --MEM 10C0000-10C007F
  --MEM 1080000-10BFFFF
  
  Notes:
  
  1. In system devices the Memory and I/O ranges show up as being
  used by Toshiba ToPic CardBus Controller.
  2. This unit also needs PAT_CB.EXE (9-12-96) loaded as device
  in the CONFIG.SYS.
  
  --Windows 98 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0580-05FF
  --MEM 10C0000-10C007F
  --MEM 1080000-10BFFFF
  
  Notes:
  
  1. In system devices the Memory and I/O Ranges show up as being
  used by Toshiba ToPic CardBus Controller.
  2. This unit also needs PAT_CB.EXE (9-12-96) loaded as device
  in the CONFIG.SYS
  
  
• Tecra 730* CDT /2.1
  
  --BIOS v5.30
  --DOS test completed
  --CBEODI.COM v1.4
  
  Resources:
  
  --INT 11
  --MEM D000
  --Windows 95
  --CBE.SYS v1.12
  --Manual load
  
  Resources:
  
  --INT 10
  --PORT F100-F17F
  --MEM C0000-C3FFF
  --Windows 95 OSR2 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0400-047F
  --MEM 1080000-10BFFFF(both slots)
  
  Note: In system devices the Memory and I/O Ranges show up as
  being used by Toshiba ToPic CardBus Controller.
  
  --Windows 98 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0580-05FF
  --MEM 10C0000-10C007F
  --MEM 1080000-10BFFFF(both slots)
  
  Note: In system devices the Memory and I/O Ranges show up as
  being used by Toshiba* ToPic* CardBus Controller.
  
  
• Tecra 740* /2.1
  
  --BIOS v6.20
  --Windows 95 OSR2 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0400-047F
  --MEM 1080000-10BFFFF(both slots)
  
  Note: In system devices the Memory and I/O Ranges show up as
  being used by Toshiba ToPic CardBus Controller.
  
  --Windows 98 test completed
  --CBE.SYS v1.12
  
  Resources:
  
  --INT 11
  --PORT 0580-05FF
  --MEM 10C0000-10C007F
  --MEM 1080000-10BFFFF(both slots)
  
  Note: In system devices the Memory and I/O Ranges show up as
  being used by Toshiba* ToPic* CardBus Controller.  

This applies to:

Xircom® CardBus Ethernet 10/100 Adapter (CBE-10/100BTX) Xircom® CardBus Ethernet II 10/100 Adapter (CBE2-100) Xircom® RealPort™ CardBus Ethernet 10/100 Adapter (RBE-100) Xircom® RealPort2™ CardBus Ethernet 10/100 Adapter (R2BE-100)