Networking Connectivity
Intel® Server Adapters
Linux ixgbe* Base Driver overview and installation

Using the ixgbe Base Driver for 10 Gigabit Intel® Network Connections

The ixgbe driver supports 82598 and 82599-based PCI Express* 10 Gigabit Network Connections.

For information concerning driver configuration details, please refer to the README file located at the download link above.

Overview

The Linux* base driver supports the 2.6.x kernel, and includes support for any Linux supported system, including Intel® Itanium® Processors: 2, x86_64, i686, and PPC.

These drivers are only supported as a loadable module at this time. Intel is not supplying patches against the kernel source to allow for static linking of the driver. A version of the driver may already be included by your distribution and/or the kernel.org kernel. For questions related to hardware requirements, refer to the documentation supplied with your Intel adapter. All hardware requirements listed apply to use with Linux.

The following features are now available in supported kernels:

  • Native VLANs
  • Channel Bonding (teaming)
  • SNMP
  • Generic Receive Offload
  • Data Center Bridging

Channel Bonding documentation can be found in the Linux kernel source: /Documentation/networking/bonding.txt

The driver information previously displayed in the /proc file system is not supported in this release. Alternatively, you can use ethtool (version 1.6 or later), lspci, and ifconfig to obtain the same information.

The driver in this release is compatible with 82598 and 82599-based Intel Network Connections.

For more information on how to identify your adapter, go to the Adapter & driver ID guide at:

Network Connectivity: Retail Intel® Ethernet Adapter PCI Device ID and Part Number List

For the latest Intel network drivers for Linux, refer to the following Web site. Select the link for your adapter.

Network Connectivity: Intel® Ethernet Adapters

SFP+ devices with plugable optics

82599-based adapters

Notes
  • If your 82599-based Intel® Network Adapter came with Intel optics or is an Intel® Ethernet Server Adapter X520-2, then it only supports Intel optics and/or the direct attach cables listed below.

  • When 82599-based SFP+ devices are connected back to back, they should be set to the same Speed setting via ethtool. Results may vary if you mix speed settings.

Supplier Type Part Numbers Works with Intel®
Ethernet Converged
Network Adapter
X520 Series
SR Modules
Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDZ-IN2 Yes
Intel DUAL RATE 1G/10G SFP+ SR (bailed) FTLX8571D3BCV-IT Yes
Intel DUAL RATE 1G/10G SFP+ SR (bailed) AFBR-703SDDZ-IN1 Yes
LR Modules
Intel DUAL RATE 1G/10G SFP+ LR (bailed) FTLX1471D3BCV-IT Yes
Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDZ-IN2 Yes
Intel DUAL RATE 1G/10G SFP+ LR (bailed) AFCT-701SDDZ-IN1 Yes

The following is a list of 3rd party SFP+ modules that have received some testing. Not all modules are applicable to all devices.

Supplier Type Part Numbers Works with Intel®
Ethernet Converged
Network Adapter
X520 Series
Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL No
Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ No
Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL No
Finisar DUAL RATE 1G/10G SFP+ SR (No Bail) FTLX8571D3QCV-IT No
Avago DUAL RATE 1G/10G SFP+ SR (No Bail) AFBR-703SDZ-IN1 No
Finisar DUAL RATE 1G/10G SFP+ LR (No Bail) FTLX1471D3QCV-IT No
Avago DUAL RATE 1G/10G SFP+ LR (No Bail) AFCT-701SDZ-IN1 No
Finisar 1000BASE-T SFP FCLF8522P2BTL Yes
Avago 1000BASE-T SFP ABCU-5710RZ Yes

82599-based adapters support all passive and active limiting direct attach cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.

Laser turns off for SFP+ when ifconfig down

"Ifconfig down" turns off the laser for 82599-based SFP+ fiber adapters. "Ifconfig up" turns on the laser.

82598-based adapters

Notes
  • Intel® Network Adapters that support removable optical modules only support their original module type (i.e., the Intel® 10 Gigabit SR Dual Port Express Module only supports SR optical modules). If you plug in a different type of module, the driver will not load.

  • Hot Swapping/hot plugging optical modules is not supported.

  • Only single speed, 10 gigabit modules are supported.

  • LAN on Motherboard (LOMs) may support DA, SR, or LR modules. Other module types are not supported. Please see your system documentation for details.

The following is a list of SFP+ modules that have received some testing. Not all modules are applicable to all devices.

Supplier Type Part Numbers
Finisar SFP+ SR bailed, 10g single rate FTLX8571D3BCL
Avago SFP+ SR bailed, 10g single rate AFBR-700SDZ
Finisar SFP+ LR bailed, 10g single rate FTLX1471D3BCL

82598-based adapters support all passive direct attach cables that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications. Active direct attach cables are not supported.

THIRD PARTY OPTIC MODULES AND CABLES REFERRED TO ABOVE ARE LISTED ONLY FOR THE PURPOSE OF HIGHLIGHTING THIRD PARTY SPECIFICATIONS AND POTENTIAL COMPATIBILITY, AND ARE NOT RECOMMENDATIONS OR ENDORSEMENT OR SPONSORSHIP OF ANY THIRD PARTY’S PRODUCT BY INTEL. INTEL IS NOT ENDORSING OR PROMOTING PRODUCTS MADE BY ANY THIRD PARTY AND THE THIRD PARTY REFERENCE IS PROVIDED ONLY TO SHARE INFORMATION REGARDING CERTAIN OPTIC MODULES AND CABLES WITH THE ABOVE SPECIFICATIONS. THERE MAY BE OTHER MANUFACTURERS OR SUPPLIERS, PRODUCING OR SUPPLYING OPTIC MODULES AND CABLES WITH SIMILAR OR MATCHING DESCRIPTIONS. CUSTOMERS MUST USE THEIR OWN DISCRETION AND DILIGENCE TO PURCHASE OPTIC MODULES AND CABLES FROM ANY THIRD PARTY OF THEIR CHOICE. CUSTOMERS ARE SOLELY RESPONSIBLE FOR ASSESSING THE SUITABILITY OF THE PRODUCT AND/OR DEVICES AND FOR THE SELECTION OF THE VENDOR FOR PURCHASING ANY PRODUCT. THE OPTIC MODULES AND CABLES REFERRED TO ABOVE ARE NOT WARRANTED OR SUPPORTED BY INTEL. INTEL ASSUMES NO LIABILITY WHATSOEVER, AND INTEL DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF SUCH THIRD PARTY PRODUCTS OR SELECTION OF VENDOR BY CUSTOMERS.

Operating System:

Linux*

This applies to:

Intel® 10 Gigabit AF DA Dual Port Server Adapter
Intel® 10 Gigabit AT Server Adapter
Intel® 10 Gigabit AT2 Server Adapter
Intel® 10 Gigabit CX4 Dual Port Server Adapter
Intel® 10 Gigabit XF LR Server Adapter
Intel® 10 Gigabit XF SR Dual Port Server Adapter
Intel® 10 Gigabit XF SR Server Adapter
Intel® Ethernet Converged Network Adapter X520 Series
Intel® Ethernet Converged Network Adapter X540-T1
Intel® Ethernet Converged Network Adapter X540-T2
Intel® Ethernet Server Adapter X520 Series
Intel® Ethernet Server Adapter X520-DA2
Intel® Ethernet Server Adapter X520-LR1
Intel® Ethernet Server Adapter X520-SR1
Intel® Ethernet Server Adapter X520-SR2
Intel® Ethernet Server Adapter X520-T2
Intel® PRO/10GbE CX4 Server Adapter
Intel® PRO/10GbE LR Server Adapter
Intel® PRO/10GbE SR Server Adapter

Solution ID: CS-032530
Last Modified: 10-Sep-2014
Date Created: 05-Jun-2011
Back to Top