| System Compatibility |
PCI systems - PCI specification 2.2 |
| Media (Cable) Connectors |
RJ45 |
| Data Rate Mode |
10 or 100 Mbps |
| Interrupt Levels |
PCI: INTA (Interrupt pin 1) and INTB (Interrupt pin 2) |
| On Board Cache |
512K 82550 LAN controller(Port A) |
| Power Requirements |
4.50 Watts (900 mA) @ +5 VDC Maximum (100Mbps Full-duplex maximum network load on both ports) |
| Operating Temperature |
(operating) 0-55 degrees C
(non-operating) -40 - +70 degrees C |
| Humidity |
(operating) RH of 92% at +55 C @ < 25% RH/hr
(non-operating) RH of 85% at +55 C @ < 25% RH/hr
(packaged product) RH of 92% at +55 C @ < 40% RH/hr |
| Dimensions |
2.530 inches x 6.392 inches (measured without the bracket) |
| Diagnostic LED |
4 LED's - Activity / Link and 100 Mbps
LEDs are visible at the top of the dual RJ45 and will indicate visual status. |
| Diagnostic Software |
On-board On-network Responder |
| Estimated Mean Time Between Failures (MTBF) |
588,679 hours (~67.2 years) |
| Certifications |
This product has been tested, approved, and certified as measured by the following:
- FCC Part 15, Subpart J, Class B
- UL Listed
- CE DECLARED COMPLIANCE: Council Directive 89/336/EEC when tested in a representative chassis via standards EN55022 and EN50082-1. Council Directive 72/23/EEC via standard EN6095
|
