| Feature |
Value |
| PCI bus compatibility |
PCI 2.2 specification |
| Connector |
RJ-45, 100BASE-TX |
| Power requirements |
PCI 5.0V ±5% |
| Interrupt |
INTA |
| LEDs |
2 LEDs:
SPEED LED, = ON for 100Mbps
LNK/ACT = ON for Link, FLASHes with Activity |
| Duplex mode |
Half- or Full-duplex |
| Data Rate |
10 or 100 Mbps |
| Transmit/Receive Buffer |
6 Kbytes |
| Dimensions |
2.00" x 4.7" measured without the bracket |
| Boot Rom |
64kx8 FLASH installed, configured with Intel Boot Agent 3.0 (combined PXE/RPL image). 3.3V-powered FLASH device. |
| Operating temperature |
Temperature
| |
Operating |
0 to +55 oC |
@ < 2 oC/min |
| |
Non-operating |
-40 to +70 oC |
@ < 4 oC/min |
|
| Humidity |
10% - 90%, non-condensing |
| Standards conformance |
IEEE 802.3
IEEE 802.3ac
IEEE 802.3z
IEEE 802.3x
IEEE 802.1p
IEEE 802.1Q
PCI 2.2 specification |
| Compliance & Certification |
- FCC Part 15, Subpart J, Class B/Canada ICES-003/Japan VCCI Class B/CISPR 22 Class B
- UL Recognized
- CE DECLARED COMPLIANCE: Council Directive 89/336/EEC when tested in a representative chassis via standards EN55022 and EN50082-1. Council Directive 72/23/EEC via standard EN60950 A1/A2/A3/A4/A11
|
| Included Software |
Intel® PROSet configuration and diagnostics utility
Intel® Boot Agent
Intel® Priority Packet
Intel Teaming (Servers only) |
| MTBF |
1,389,236 hours (~159 years) |
