|
These instructions apply to Release 2.0 driver disk for the PRO/100 ISA adapter.
Location of Driver: \NDIS\E100ISA.OS2
NEW INSTALLATION
- Install OS/2* Warp as instructed in the IBM installation guide.
- When prompted to Install Network Support, select Yes.
- In the IBM Peer for OS/2 window, select Yes, install OS/2 Peer.
- Enter a Unique workstation name and description when prompted.
- Enter the name of your existing Domain when prompted. If you do not have an existing domain name to use, use the default IBMPEERS.
- In the Novell NetWare* Client for OS/2 window, select Yes, install if your workstation is on a Novell NetWare network.
- In the Access Internet with Modem window, select No.
- In the Select Network Adapter Window, select Other Adapter.
- When prompted for the driver, insert the PRO/100 ISA driver disk and specify the path as A:\NDIS.
OS/2 Warp will then copy the driver and add it to the LAN adapter list.
- From the LAN adapter list, select the PRO/100 ISA adapter and click ADD.
- Follow through the rest of the OS/2 Warp installation as instructed in the IBM installation guide.
OS/2 WARP IS ALREADY INSTALLED
- Double-click the MPTS Icon in the OS/2 WARP main program group.
- From the Multi-protocol Transport Service window, select Configure.
- From the Configure window, select LAN adapters and protocols and click on Configure.
- From the LAPS Configuration window, remove the existing installed LAN adapters and protocols.
Note: you must remove the protocols before you can remove the LAN adapter.
- After the LAN adapter and protocols have been removed, select Other Adapters.
- When prompted for the driver, insert the insert the EtherExpress PRO/100 ISA driver disk and specify the path as A:\NDIS.
OS/2 Warp will then copy the driver and add it to the LAN adapter list.
- From the LAN adapter list, select PRO/100 ISA adapter.
- Select the protocols being used on your network, and click Add. The default protocol used by OS/2 Warp is IBM OS/2 NETBIOS. Also, if you need support for Novell NetWare, add IBM NetWare Requester Support for OS/2. If you need TCP/IP support add IBM TCP/IP.
- After the LAN adapter and protocols have been configured, select OK to exit.
- From the Configure window, select Close.
- From the Multi-protocol Transport Service window, select Exit.
- When prompted to modify CONFIG.SYS, select Exit to have OS/2 Warp make the modifications for you.
- Shut-down OS/2 Warp, and reboot for the changes to take effect.
SAMPLE PROTOCOL.INI (c:\ibmcom\protocol.ini)
[PROT_MAN]
DRIVERNAME = PROTMAN$
[IBMLXCFG]
netbeui_nif = netbeui.nif
odi2ndi_nif = odi2ndi.nif
tcpip_nif = tcpip.nif
E100IEO2_nif = E100IEO2.nif
[NETBIOS]
DriverName = netbios$
ADAPTER0 = netbeui$,0
[netbeui_nif]
DriverName = netbeui$
Bindings = E100IEO2_nif
ETHERAND_TYPE = "I"
USEADDRREV = "YES"
OS2TRACEMASK = 0x0
SESSIONS = 130
NCBS = 225
NAMES = 21
SELECTORS = 15
USEMAXDATAGRAM = "NO"
ADAPTRATE = 1000
WINDOWERRORS = 0
MAXDATARCV = 4168
TI = 30000
T1 = 1000
T2 = 200
MAXIN = 1
MAXOUT = 1
NETBIOSTIMEOUT = 2000
NETBIOSRETRIES = 3
NAMECACHE = 1000
RNDOPTION = 1
PIGGYBACKACKS = 1
DATAGRAMPACKETS = 10
PACKETS = 350
LOOPPACKETS = 8
PIPELINE = 5
MAXTRANSMITS = 6
MINTRANSMITS = 2
DLCRETRIES = 10
FCPRIORITY = 5
NETFLAGS = 0x0
[odi2ndi_nif]
DriverName = odi2ndi$
Bindings = E100IEO2_nif
ETHERNET_802.3 = "yes"
ETHERNET_802.2 = "yes"
ETHERNET_II = "yes"
ETHERNET_SNAP = "yes"
TRACE = 0x0
[tcpip_nif]
DriverName = TCPIP$
Bindings = E100IEO2_nif
[E100IEO2_nif]
DriverName = E100IS$
Serial = "#0"
MediaType = "AUTO"
RxEarly = "OFF"
Use32BitIO = "NO"
SAMPLE CONFIG.SYS:
IFS=C:\OS2\HPFS.IFS /CACHE:1024 /CRECL:4 /AUTOCHECK:CE
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,LAUNCHPAD
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=C:\MPTN\DLL;C:\IBMCOM\DLL;C:\IBMLAN\NETLIB;C:\MUGLIB\DLL;.;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\MMOS2\DLL;C:\GRPWARE;C:\NSC\DLL;C:\NETWARE;C:\NETWARE\NLS\ENGLISH;L:\OS2;P:\OS2;c:\tcpip\dll;C:\TCPIP\UMAIL;
SET PATH=C:\MPTN\BIN;C:\IBMCOM;C:\IBMLAN\NETPROG;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\NSC;C:\NETWARE;L:\OS2;P:\OS2;c:\tcpip\bin;C:\TCPIP\UMAIL;
SET DPATH=C:\IBMCOM;C:\IBMLAN\NETPROG;C:\IBMLAN;C:\MUGLIB;C:\OS2;C:\OS2\SYSTEM;C:\OS2\MDOS\WINOS2;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;C:\GRPWARE;C:\NSC;C:\NETWARE;C:\NETWARE\NLS;C:\NETWARE\NLS\ENGLISH;L:\NLS;P:\NLS;
BASEDEV=DETNE2.SYS
SET PROMPT=$I[$P]
SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\MMOS2\HELP;C:\NETWARE\NLS\ENGLISH;c:\tcpip\
help;C:\TCPIP\UMAIL;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
BASEDEV=IBMKBD.SYS
DEVICE=C:\IBMCOM\PROTOCOL\LANPDD.OS2
DEVICE=C:\IBMCOM\PROTOCOL\LANVDD.OS2
DEVICE=C:\IBMCOM\LANMSGDD.OS2 /I:C:\IBMCOM
DEVICE=C:\IBMCOM\PROTMAN.OS2 /I:C:\IBMCOM
DEVICE=C:\OS2\LOG.SYS
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
BUFFERS=90
IOPL=YES
DISKCACHE=D,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM 2048 2048
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET BOOKSHELF=C:\IBMLAN\BOOK;C:\OS2\BOOK;C:\MMOS2;c:\tcpip\doc;
SET SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
REM SET DELDIR=C:\DELETE,512;D:\DELETE,512;E:\DELETE,512;F:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=XDFLOPPY.FLT
BASEDEV=OS2DASD.DMD
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\NETWARE\VIPX.SYS
DEVICE=C:\NETWARE\VSHELL.SYS GLOBAL
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\MDOS\VWIN.SYS
DEVICE=C:\OS2\MDOS\VW32S.SYS
DEVICE=C:\OS2\BOOT\OS2CDROM.DMD /Q
IFS=C:\OS2\BOOT\CDFS.IFS /Q
DEVICE=C:\OS2\MDOS\VCDROM.SYS
BASEDEV=IBMIDECD.FLT
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS SERIAL=COM1
DEVICE=C:\OS2\BOOT\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
SET MMBASE=C:\MMOS2;
SET DSPPATH=C:\MMOS2\DSP;
SET NCDEBUG=4000
DEVICE=C:\MMOS2\SSMDD.SYS
DEVICE=C:\MMOS2\R0STUB.SYS
RUN=C:\OS2\EPW.EXE
REM --- NetWare Requester statements BEGIN ---
REM --- NetWare Requester statements END ---
SET ETC=C:\MPTN\ETC
RUN=C:\OS2\SYSTEM\LOGDAEM.EXE
CALL=C:\IBMCOM\PROTOCOL\NETBIND.EXE
RUN=C:\IBMCOM\LANMSGEX.EXE
DEVICE=C:\MPTN\PROTOCOL\SOCKETS.SYS
DEVICE=C:\MPTN\PROTOCOL\AFOS2.SYS
DEVICE=C:\MPTN\PROTOCOL\AFINET.SYS
DEVICE=C:\MPTN\PROTOCOL\IFNDIS.SYS
RUN=C:\MPTN\BIN\CNTRL.EXE
CALL=C:\OS2\CMD.EXE /Q /C C:\MPTN\BIN\MPTSTART.CMD
DEVICE=C:\IBMCOM\PROTOCOL\NETBEUI.OS2
DEVICE=C:\IBMLAN\NETPROG\RDRHELP.200
REM IFS=C:\IBMLAN\NETPROG\NETWKSTA.200 /I:C:\IBMLAN /N
RUN=C:\IBMLAN\NETPROG\LSDAEMON.EXE
DEVICE=C:\IBMLAN\NETPROG\VNETAPI.OS2
RUN=C:\IBMLAN\NETPROG\VNRMINIT.EXE
SET NWDBPATH=C:\IBMLAN\NETPROG
REM --- NetWare Requester statements BEGIN ---
SET NWLANGUAGE=ENGLISH
DEVICE=C:\NETWARE\LSL.SYS
RUN=C:\NETWARE\DDAEMON.EXE
DEVICE=C:\IBMCOM\PROTOCOL\ODI2NDI.OS2
REM -- ODI-Driver Files BEGIN --
REM DEVICE=C:\NETWARE\NTR2000.SYS
REM -- ODI-Driver Files END --
DEVICE=C:\NETWARE\ROUTE.SYS
DEVICE=C:\NETWARE\IPX.SYS
DEVICE=C:\NETWARE\SPX.SYS
RUN=C:\NETWARE\SPDAEMON.EXE
REM DEVICE=C:\NETWARE\NMPIPE.SYS
REM DEVICE=C:\NETWARE\NPSERVER.SYS
REM RUN=C:\NETWARE\NPDAEMON.EXE
DEVICE=C:\NETWARE\NWREQ.SYS
IFS=C:\NETWARE\NWIFS.IFS
RUN=C:\NETWARE\NWDAEMON.EXE
REM DEVICE=C:\NETWARE\NETBIOS.SYS
REM RUN=C:\NETWARE\NBDAEMON.EXE
REM DEVICE=C:\OS2\MDOS\LPTDD.SYS
REM --- NetWare Requester statements END ---
SET TMP=c:\tcpip\tmp
DEVICE=c:\tcpip\bin\vdostcp.vdd
DEVICE=c:\tcpip\bin\vdostcp.sys
RUN=c:\tcpip\bin\VDOSCTL.EXE
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_VGA
SET VIO_VGA=DEVICE(BVHVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
DEVICE=C:\IBMCOM\PROTOCOL\NETBIOS.OS2
DEVICE=C:\IBMCOM\MACS\e100isa.OS2
This applies to:
| 
