|
Installing and configuring Intel PRO/100B PCI LAN Adapters using IBM LAN support for AS/400 and NetWare* v1.02.
Location of Driver: \NDIS\E100B.DOS (for LANSUP)
Location of Driver: \DOS\E100BODI.COM (for ODINSUP)
(Sample configuration files are included below.)
General Instructions
There are two ways to connect the Intel® EtherExpress™ PRO/100B PCI adapter simultaneously to an IBM AS/400 (or other host based on DLC protocol) and a Novell server:
- Using LANSUP.COM (NDIS-based) or
- Using ODINSUP.COM (ODI-based)
LANSUP.COM and ODINSUP.COM are Novell drivers included in VLMUPx.EXE (where x is the number of the latest version). The files are available on the World Wide Web (http://netwire.novell.com/).
Sample CONFIG.SYS file for LANSUP
- DEVICE = \LANMAN\PROTMAN.DOS (v1.1 or later )
- DEVICE = \LANMAN\E100B.DOS (v1.34 or later)
- DEVICE = \LANMAN\DXMA0MOD.SYS (v1.35 or later)
- DEVICE = \LANMAN\DXME0MOD.SYS (v1.35 or later)
- DEVICE = C:\PCS\EIMPCS.SYS
- DEVICE = C:\PCS\ECYDDX.SYS
Sample AUTOEXEC.BAT file for LANSUP
- CD\LANMAN
- NETBIND (v1.1 or later )
- LSL (v2.11 or later)
- LANSUP (v1.27 or later)
- IPXODI (v2.20 or later)
- NETX or VLM (v3.32 or later of NETX.EXE, or v1.20 or later of VLM.EXE)
- F:
- LOGIN
- C:\PCS\STARTPCS
Sample PROTOCOL.INI file for LANSUP
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[ETHERNET]
DRIVERNAME = DXME0$
BINDINGS = E100B
[E100B]
DRIVERNAME = E100B$
Sample NET.CFG file for LANSUP
Link Driver LANSUP
Max Frame Size = 1490
NetWare DOS Requester
First Network Drive = F
Sample CONFIG.SYS file for ODINSUP
- DEVICE = \LANMAN\PROTMAN.DOS /I:C:\LAMAN (v1.1 or later)
- DEVICE = \LANMAN\DXMA0MOD.SYS (v1.35 or later)
- DEVICE = \LANMAN\DXME0MOD.SYS (v1.35 or later)
- DEVICE = C:\PCS\EIMPCS.SYS
- DEVICE = C:\PCS\ECYDDX.SYS
Sample AUTOEXEC.BAT file for ODINSUP
- CD\LANMAN
- LSL (version 2.11 or later)
- E100BODI (v1.25 or later)
- ODINSUP (v2.00 or later)
- NETBIND (v1.1 or later)
- IPXODI (v2.20 or later)
- NETX or VLM (v3.32 or later of NETX.EXE; v1.20 or later of VLM.EXE)
- F:
- LOGIN
- C:\PCS\STARTPCS
Sample PROTOCOL.INI file for ODINSUP
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[ETHERNET]
DRIVERNAME = DXME0$
BINDINGS = E100BODI
[E100BODI]
DRIVERNAME = E100BODI$
Sample NET.CFG (C:\LANMAN\NET.CFG) file for ODINSUP
Link Driver E100BODI
Frame ethernet_802.2
Frame ethernet_II
Frame ethernet_802.2
Frame ethernet_snap
Protocol ODINSUP
Bind E100BODI
NetWare DOS Requester
First Network Drive = F
This applies to:
| 
