| OS Support |
Release 2.20 |
Release 3.0 |
| Windows* Server 2003 |
NO. Not supported on this OS. Do not install release 2.2 on this OS as it may cause irrecoverable problems. |
Yes. Requires the Microsoft iSCSI Initiator Service |
| Windows* 2000 |
SP3, or SP2 with hot fixes Q302895 and Q248720 |
With SP3. Requires the Microsoft iSCSI Initiator Service |
| Windows* XP PRO |
Yes |
Yes. Requires the Microsoft iSCSI Initiator Service |
| Linux** |
Red Hat* Linux Version 7.2 (2.4.7 kernel) |
Red Hat*Linux 9.0 and AS 2.1 |
| Linux Source Code |
Available on Download Finder |
Available on Download Finder |
| |
| iSCSI Protocol Support |
Release 2.20 |
Release 3.0 |
| Draft 0.8 |
No |
No |
| Drafts 0.16, 0.17, 0.18, 0.19 and 0.20 and ratified standard |
Should be upgraded to v220*** Firmware. If your firmware is less than 2.0, see note below |
With 4.6.87 firmware (included with the 3.0 download) | |
Notes:
- These products are not tested with, or supported with, the UNH target emulator.
- The original version of the adapter (PWSA8700T PBA# A57521-xxx) must be updated to the latest firmware to work with the latest version of the drivers. This model uses the same firmware as the PWSA8701T, which is included in the latest driver download 30IPStorage.exe. If your PWSA8700T has a firmware revision less than 2.0, you must contact Intel customer support (by phone or email in North America, by email from other locations) for an interim release that will allow you to update it to the latest version. There is no charge for this interim release.
- There is currently no support for this product in 64-bit operating systems.
**Support available by emailing iscsiNicSupport@mailbox.intel.com. Be sure to indicate target spec used. ***If your firmware version is less that 2.x, contact Intel customer support for interim release needed before updating to the latest.
Operating System:
| Windows 2000*, Linux*, Windows XP Professional*, Red Hat Linux Advanced Server 2.x*, Windows Server 2003* |
This applies to:
| 
