|
These documents describe how to install the FMJBACKPLANE (Revision 1) and FMJBACKPLANE2 (Revision 2) Backplane Boards into the Intel® Storage System SSR316MJ2.
The FMJBACKPLANE is the backplane board used in the Intel® Storage System SSR316MJ2 equipped with three SATA controllers (Revision 1 storage system; MM# 862213).
The FMJBACKPLANE2 is the backplane board used in the Intel® Storage System SSR316MJ2 equipped with two SATA controllers (Revision 2 storage system; MM# 874024).
While the backplane boards themselves are the same for the Revision 1 and Revision 2 versions of the Intel® Storage System SSR316MJ2, there are cable connection and jumper configuration differences.

Note: PDF Files require Adobe Acrobat* Reader†

† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
|