|
The memory module on the Intel® Server Platform SR870BN4 has 2 memory controller boards that each has 8 DIMM sockets each, which can support up to 32 GB of Registered DDR266 memory using 16 72-bit DIMM modules. The following memory features are supported:
- DDR266 registered ECC compatible 2.5V modules (in compliance with the DDR JEDEC DIMM Specification)
- DIMMs with capacity of 128, 256MB, 512MB, 1G, 2G and 4G. Other DRAM sizes may function correctly but will not be validated.
- Minimum configuration is 1G using four 256MB DIMMs.
The memory control Subsystem in the E8870 chip set supports memory scrubbing, single-bit error correction and multiple-bit error detection and the Intel® Single Device Data Correction feature. Memory can be implemented with either single sided (one row) or double-sided (two row) DIMMs.
Note: Intel does not test all possible combinations of mixed memory modules within the same server system. Functionality issues may occur if mixed memory types are installed in the same server system. Intel recommends that memory modules of identical size, type, banking and stacking technology, and vendor are installed in each server system. Customers who choose to use mixed memory module configurations assume responsibility for ensuring that these configurations are compatible and tested.
Note: This content is updated frequently, so please refresh your browser to ensure that you are downloading the most current version.
Note: PDF Files require Adobe Acrobat* Reader†
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
