The Intel® Server Platform SR870BH2 Model 0 & Model 1 configurations does not include a power cord. This is due to the unique requirements and the differing AC services in the various regions where a Intel Server Platform SR870BH2 Server System may be shipped. The following information is provided to aid in sourcing a suitable power cord from a supplier.

1. Input Connector

   The input connectors that are installed on the SR870BH2 Server System are defined by IEC 320-C14 and are rated for 15A.

2. Cord and Service

   

   The following criteria should be used for the actual wire cord and AC service selection for installation of the SR870BH2 Server System. The selections should be further verified for the safety requirements of each application by a certified safety and regulatory professional.

   • For North America, the cord must be UL Listed/CSA Certified, 18/3, 65° C type SJT/SVT, with NEMA 5-15P or NEMA 6-15P attachment plug and IEC 320 C13 outlet.
   • For outside of North America, the cord must be flexible VDE certified or HAR rated 250V, 0.75mm minimum conductor size with IEC 320 C13 outlet, and rated for no less than the product ratings. The AC wall attachment plug shall be a three conductor grounding type, rated at 125% of the total input current rating and must be for the configuration of the specific region or country. The AC wall attachment plug must bear at least an accepted safety agency certification mark for the specific region or country.
   • The cord must be no longer than 4.5 meters (14.76 feet). Do not attempt to modify or use an AC power cord that is not the exact type required.
   
   
   
3. System Power Consumption

   The maximum power consumption expectations of the SR870BH2 Server System are:

   • 12.0 Amp max while operating at 100 -127 VAC
   • 6.0 Amp max while operating at 200 – 240 VAC
   
   
   
4. Reference vendor
   Vendor Name: Quail Electronics
   Web Address: http://www.quail.com*
   Contact: (925) 373-6700
   

This applies to:

Intel® Server System SR870BH2