|
The memory module on the Intel® Server Platform SR870BH2 has 8 DIMM sites on the main board, which can hold up to 16 GB of Registered DDR266 memory using eight 2GB 72-bit DIMM modules. The following memory features are supported:
- DDR266 registered ECC compatible 2.5V modules (in compliance with the DDR JEDEC DIMM Specification).
- DIMMs with capacity of 256MB, 512MB, 1G and 2G. Other DRAM sizes may function correctly but will not be validated.
- Minimum configuration is 1G using four 256MB DIMMs.
The memory control Subsystem in the 870 chip set supports memory scrubbing, single-bit error correction and multiple-bit error detection and the Intel® Single Device Data Correction feature. Memory can be implemented with either single sided (one row) or double-sided (two row) DIMMs.
Note: Intel does not test all possible combinations of mixed memory modules within the same server system. Functionality issues may occur if mixed memory types are installed in the same server system. Intel recommends that memory modules of identical size, type, banking and stacking technology, and vendor are installed in each server system. Customers who choose to use mixed memory module configurations assume responsibility for ensuring that these configurations are compatible and tested.
Note: This content is updated frequently, so please refresh your browser to ensure that you are downloading the most current version.
Note: PDF Files require Adobe Acrobat* Reader†
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
