|
What is the most optimized function for the Intel® Server Board SE7525GP2?
The Intel® Server Board SE7525GP2 is primarily designed for graphic workstation use.
Which PCI-Express* video/audio card is compatible with Intel® Server Board SE7525GP2?
Please refer to the Tested Hardware and Operating System List under the Video Adapter and Audio Adapter section for more information.
How to configure the onboard SATA RAID?
The Intel Embedded Server RAID Technology supports two serial ATA ports, providing a cost-effective way to achieve higher transfer rates and reliability. RAID 0 and 1 are both supported levels. Please refer to Intel® Embedded Server RAID Technology User's Guide [PDF] for more information.
Missing microcode message during POST with an installation of a new processor.
Check for the compatibility of the processor against the server board being used. This information can be found under the compatibility section of the respective platforms. Perform a BIOS update to ensure that the processor microcode is integrated into the server board BIOS.
What do I do when a password is requested by the FRUSDR update utility?
Please refer to the Password May be Requested document for more information.
How do I resolve 'noisy fan' issues?
Please make sure you install your system fans and CPU fans to the correct connector on the system board. Then update FRUSDR following the instruction associated with the FRUSDR update.
This applies to:
| 
