|
The Intel® Server Board SE7520AF2 is designed to support one or two Intel® Xeon® processors with 1MB or 2MB L2 Cache with frequencies starting at 2.8 GHz using 90 nanometer technology and utilizing an 800 MHz front side bus. Previous generations of the Intel Xeon processor are not supported for use on Intel Server Board SE7520AF2. When two processors are installed, both must be of identical revision, core voltage, cache size, and bus/core speed. When only one processor is installed, it should be populated into the socket labeled "CPU_1" with the other CPU socket remaining unpopulated.
Starting with board revisions -703 or later, the Intel® Server Board SE7520AF2 will support the Dual-Core Intel® Xeon® Processor 2.80 GHz. Please refer to the integration guide for more information.
Distributors may have inventory of server board revisions that do and do not support Dual-Core Intel® Xeon® Processor 2.80GHz with 800MHz front side bus processors. If you are planning to integrate with dual-core processors, please be sure to specify to your distributor that you require a board revision that will support dual-core processors.
For your convenience, there is a hyperlink for each of the processors featured. These hyperlinks will route you to the Intel® Processor Spec Finder tool, providing you with processor specifications and order code information.
For optimum system performance, only identical processors should be installed in a system. Processor steppings can be mixed in a system provided that there is no more than 1-stepping difference between the processors installed. If the installed processors are more than 1-stepping apart, an error (8080 through 8183) is logged in the System Event Log (SEL). Acceptable mixed steppings are not reported as errors.
If you are using an Intel® Server Chassis SC5300 , please ensure that the passive heatsink is utilized.
Intel® Xeon® processors:
| sSpec# |
CPU Speed |
Bus Speed |
Mfg-
Tech |
Stepping |
Cache
Size |
Package
Type |
Notes |
|
SL8ZR |
2.80 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,3,4,5,6,7,10 |
|
SL7DV |
2.80 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
10 |
|
SL7HF |
2.80 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
3,10 |
|
SL7PD |
2.80 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,5,10 |
|
SL7TB |
2.80 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,3,5,10 |
|
SL8ZQ |
3.00 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,3,4,5,6,7,10 |
|
SL7ZF |
3.00 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,4,5,6,7,10 |
|
SL7DW |
3.00 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
10 |
|
SL7HG |
3.00 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
3,10 |
|
SL7PE |
3.00 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,5,10 |
|
SL7TC |
3.00 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,3,5,10 |
|
SL8ZP |
3.20 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,3,4,5,6,7,10 |
|
SL7ZE |
3.20 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,3,4,5,6,7,10 |
|
SL7DX |
3.20 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
10 |
|
SL7HH |
3.20 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
3,10 |
|
SL7PF |
3.20 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,5,10 |
|
SL7TD |
3.20 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,3,5,10 |
|
SL7ZK |
3.40 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,3,4,5,6,7,10 |
|
SL7ZD |
3.40 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,4,5,6,7,10 |
|
SL7DY |
3.40 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
4,10 |
|
SL7HJ |
3.40 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
3,4,10 |
|
SL7PG |
3.40 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,4,5,10 |
|
SL7TE |
3.40 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,3,4,5,10 |
|
SL7ZJ |
3.60 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,3,4,5,6,7,10 |
|
SL7ZC |
3.60 GHz |
800 MHz |
90 nm |
N0 |
2 MB |
604-pin micro-PGA |
1,4,5,6,7,10 |
|
SL7DZ |
3.60 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
4,10 |
|
SL7HK |
3.60 GHz |
800 MHz |
90 nm |
D0 |
1 MB |
604-pin micro-PGA |
3,4,10 |
|
SL7VF |
3.60 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,4,5,10 |
|
SL7PH |
3.60 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
1,2,3,4,5,10 |
|
SL84B |
2.80 GHz |
800 MHz |
90 nm |
E0 |
1 MB |
604-pin micro-PGA |
2,5,6,10 |
|
SL8P7 |
2.80 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,8,9,10,14 |
|
SL7ZG |
2.80 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,8,9,10,14 |
|
SL8ZR |
2.80 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,8,9,10,14 |
|
SL8SV |
3.00 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,8,9,10,12,14 |
|
SL8P6 |
3.00 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,9,10,14 |
|
SL8T3 |
3.20 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,9,10,13,14 |
|
SL8P5 |
3.20 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,5,9,10,14 |
|
SL8P4 |
3.40 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,45,9,10,14 |
|
SL8P3 |
3.60 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,2,4,5,9,10,14 |
|
SL8P2 |
3.80 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,2,4,5,8,9,10,14 |
|
SL7ZB |
3.80 GHz |
800 MHz |
90 nm |
R0 |
2 MB |
604-pin micro-PGA |
1,2,4,5,8,9,10,14 |
| SL8MA |
2.80 GHz |
800 MHz |
90 nm |
A0 |
2MB x 2 |
604-pin micro-PGA |
1,2,4,5,9,10,11,15,16 | |
|
Notes:
- This stepping processor supports Intel's Execute Disable Bit functionality.
- This stepping processor supports Thermal Monitor 2 functionality. Refer to the product datasheet for additional information. These parts have Thermal Monitor 2 (TM2) feature enabled. For D-0 stepping, TM2 is enabled on 3.40 GHz and above but it is NOT supported.
- These are Intel boxed processors.
- These parts are enabled for Enhanced Intel SpeedStep® Technology (EIST).
- These parts are enabled for Enhanced Halt State (CIE).
- This stepping processor supports Thermal Monitor 2.
- This stepping processor requires BIOS P07 or higher.
- These are sold as retail Boxed Processors.
- These parts have Tcontrol programmed.
- These parts are enabled for Intel® Extended Memory 64 Technology.
- These are production parts.
- These are Intel LV (Low-Voltage) processors.
- These parts are Intel MV (Mid-Voltage) processors.
- This stepping processor requires BIOS P09.0 or higher.
- This stepping processor requires BIOS P09.10 or later. Please also refer to the integration guide for more information.
- This stepping processor is a Dual-Core Intel® Xeon® Processor.
This applies to:
|
