Support Home



Search
Support & Downloads
Server Products
Intel® Server Board SE7501BR2
VRM is not needed when integrating processor(s)

The Intel® Server Board SE7501BR2 has a single, integrated VRM (Voltage Regulator Module) to support up to two processors. It is compliant with the VRM 9.1 specification and provides a maximum of 130 AMPs. The VRM is capable of supporting current supported processors as well as processors that do not exceed the 65 Amp limit.

The board hardware and BMC will read the processor VID (voltage identification) bits for each processor before turning on the VRM. If the VIDs of the two processors are not identical, then the BMC will not turn on the VRM and a beep code is generated.

This applies to:
Intel® Server Board SE7501BR2

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-007223
Date Created: 30-Nov-2003
Last Modified: 03-Nov-2005
Back to Top