The Intel® Server Board SE7501BR2 is designed to support one or two Intel® Xeon® Processor(s) with up to 2 MB integrated L3 cache.

Use the Identifying Your Processor Web page for detailed specifications on your Intel® Xeon® Processor.

Important information when integrating an Intel® Server Board SE7501BR2 on an Intel® Server Chassis SC5200-HSRP: The Processor Wind Tunnel (PWT) parts are not required for systems using the Intel® Server Chassis SC5200 Hot-Swap, Redundant Power 650W Server Chassis (HSRP), which incorporates a different cooling solution.

For your convenience, there is a hyperlink for each of the processor speeds listed in the table below. These hyperlinks will route you to the Processor Spec Finder tool, and list available SSpec (production specification) processors for the speed you selected.

IMPORTANT: Be sure to confirm the processor stepping information, and the stepping matches the stepping in the table below for the selected processor speed.

Note All processors listed below are supported by the Intel® Server Board SE7501BR2. In a dual processor configuration, Intel requires that the same processor speed, cache size and system bus speed be used. Mixing processor speeds is not a supported or a recommended configuration.

Supported Boxed Intel® Xeon® processors

Speed (GHz) System Bus Speed (MHz) Product Order Code MM#1 Stepping L2 Cache Size/L3 Cache Size Note 3.20 533 BX80532KE3200FSL7AE 857444 M0 512KB / 2MB 1, 2, 3, 5, 7 3.20 533 BX80532KE3200E 854413 M0 512KB / 1MB 1, 2, 3, 5, 7 3.20 533 BX80532KE3200E 855692 M0 512KB / 1MB 1, 2, 3, 5, 7 3.06 533 BX80532KE3066E 854411 M0 512KB / 1MB 1, 2, 3, 5, 7 3.06 533 BX80532KE3066D 853013 851912 D1 C1 512 1, 2, 3, 5, 6 3.00 400 BX80532KC3000D 853116 853113 852549 C1 512 1, 2, 3, 5, 6 2.80 533 BX80532KE2800ESL7D5 858614 M0 512KB / 1MB 1, 2, 3, 5, 7 2.80 533 BX80532KE2800D 851292 851285 851275 851271 854409 C1 D1 M0 512 5, 6, 7 2.80 400 BX80532KC2800D 850707 850614 850009 850007 C1 512 5 2.66 533 BX80532KE2667D 851713 851712 851650 851647 854407 D1 C1 M0 512 4,5, 6, 7 2.60 400 BX80532KC2600D 850609 849701 849354 C1 512   2.40 533 BX80532KE2400ESL7D4 858615 M0 512KB / 1MB 1, 2, 3, 5, 7 2.40 533 BX80532KE2400D 851290 851280 851273 851269 854405 D1 C1 M0 512 4, 5, 6, 7 2.40 400 BX80532KC2400D 851738 851737 849846 849703 849355 845163 C1 B0 512   2.20 400 BX80532KC2200D 852103 852102 849356 848431 843623 C1 B0 512   2.00 533 BX80532KE2000D 851288 851279 851272 851268 D1 C1 512 4, 6 2.00 400 BX80532KC2000D 849353 848429 843637 C1 B0 512   1.80 400 BX80532KC1800D 852301 849357 848419 843620 C1 B0 512

¹The processor MM# is provided for your convenience, however, when ordering Boxed Intel® Xeon® processors please use the product order code.

Notes Use the Power Budget Tool to determine if there is enough power to support this configuration. If integrating the board in an Intel® Server Chassis SC5200-BRP, please refer to TA-644. Not supported in an Intel® Entry Server Chassis SR1350-E. This chassis has a maximum processor speed of 2.80 GHz, more information is available. Intel® Xeon® processors in the 604 pin PPGA FC-PGA2 form factor product order codes are BX80532KCxxxxDU or BX80532KExxxxDU. There is a "U" added to the end of the product order code. This processor uses a 1.5A CPU fan. When integrating this processor on the Intel® Server Board SE7501BR2 PBA A95686-503 or earlier on the Intel® Server Chassis SC5200 Base, SC5200 BRP, reference chassis or Intel® Server Chassis SC5250-E; the fan adapter cable included with the Intel Xeon boxed processor must be used to draw power directly from the power supply as these fans exceed the current enabled via the board's CPU Fan Headers. Integration of this processor on an Intel Server Board SE7501BR2 PBA A95686-504 or later will support direct connect of CPU fan(s) to the CPU Fan Header(s) on the board; the adapter cable is not required. For more information, see the processor integration notes. Requires Requires BIOS 6.0; BMC 1.16; FRUSDR 5.5.G or later when using an Intel® Xeon® processor in the D1 Stepping. Requires Requires BIOS 15.0; BMC 1.18; FRUSDR 5.5.I or later when using an Intel® Xeon® processor in the M0 Stepping.

Supported Intel® Xeon® processors (OEM version, not in retail box)

Speed (GHz) System Bus Speed (MHz) Product Order Code MM#1 Stepping L2 Cache Size Note 3.06 533 80532KE083512 851917 848399 D1 C1 512 1, 2, 3, 5, 6, 7 3.00 400 80532KC080512 852548 852200 C1 512 1, 2, 3, 5, 6 2.80 533 80532KE072512 851267 848397 D1 C1 512 5, 6 2.80 400 80532KC072512 849710 849546 C1 512   2.66 533 80532KE067512 851266 848401 D1 C1 512 5, 6 2.60 400 80532KC064512 849892 847694 C1 512   2.40 533 80532KE056512 851265 848396 D1 C1 512 5, 6 2.40 400 80532KC056512 849153 847695 845161 843940 C1 B0 512   2.20 400 80532KC049512 849112 843627 839580 C1 B0 512   2.00 533 80532KE041512 851264 850817 D1 C1 512 5, 6 2.00 400 80532KC041512 849873 849063 848115 843626 C1 B0 512   1.80 400 80532KC033512 849064 843625 C1 B0 512

¹The processor MM# is provided for your convenience, however, when ordering Intel® Xeon® processors please use the product order code.

Notes Use the Power Budget Tool to determine if there is enough power to support this configuration. If integrating the board in an Intel® Server Chassis SC5200-BRP, please refer to TA-644. Not supported in an Intel® Entry Server Chassis SR1350-E. This chassis has a maximum processor speed of 2.80 GHz, more information is available. Intel® Xeon® processors in the 604 pin PPGA FC-PGA2 form factor product order codes are BX80532KCxxxxDU or BX80532KExxxxDU. There is a "U" added to the end of the product order code. This processor uses a 1.5A CPU fan. When integrating this processor on the Intel® Server Board SE7501BR2 PBA A95686-503 or earlier on the Intel® Server Chassis SC5200 Base, SC5200 BRP, reference chassis or Intel® Server Chassis SC5250-E; the fan adapter cable included with the Intel Xeon boxed processor must be used to draw power directly from the power supply as these fans exceed the current enabled via the board's CPU Fan Headers. Integration of this processor on an Intel Server Board SE7501BR2 PBA A95686-504 or later will support direct connect of CPU fan(s) to the CPU Fan Header(s) on the board; the adapter cable is not required. For more information, see the processor integration notes. Requires BIOS 6.0; BMC 1.16; FRUSDR 5.5.G or later when using an Intel® Xeon® Processor in the D1 Stepping. Requires Requires BIOS 15.0; BMC 1.18; FRUSDR 5.5.I or later when using an Intel® Xeon® processor in the M0 Stepping.

Information on the Intel® Xeon® Processor Product Order Codes is available.

Information on the Intel® Xeon® Processor Support Components is available.

For customers in the US and Canada, these parts can be ordered directly from the Intel Support Web site, http://www.intel.com/buy/ .

Intel recommends that customers purchase boxed processors

This applies to:

Intel® Server Board SE7501BR2