If the user or administrator password(s) is lost or forgotten, moving the password clear jumper into the "clear" position clears both passwords. The password clear jumper must be restored to its original position before a new password(s) can be set. The password clear jumper is located on jumper block J1H1 on the Intel® Server Board SE7501BR2.

1. Power down the system and disconnect the AC power.
2. Open the server chassis.
3. Move the Password Clear jumper to the Erase position, covering pins 6 and 7 as indicated in the following diagram.
4. Reconnect the AC power, power up the system.
5. Power down the system and disconnect the AC power.
6. Return the Password Clear jumper to its original position, covering pins 5 and 6.
7. Close the server chassis.

This applies to:

Intel® Server Board SE7501BR2