|
The memory module on the Intel® Server Board SE7221BA1-E has 4 DIMM sockets, which can hold up to 4 GB of Unbuffered ECC and non-ECC DDR2-400 or DDR2-533 memory using four 72-bit DIMM modules. The following memory features are supported:
- DDR2-400 and DDR2-533 Unbuffered ECC and non-ECC compatible 1.8V modules (in compliance with the DDR JEDEC DIMM Specification)
- DIMMs with capacity of 256MB, 512MB, 1G and 2G. Other DRAM sizes may function correctly but will not be validated.
- Minimum configuration is 256MB using one 256MB DIMM.
- Maximum configuration is 4G.
Note: System resources (such as PCI and PCI Express*) require physical memory address locations that reduce available memory addresses at 4 GB. This will result in less than 4 GB of memory being available to the operating system and applications when 4 GB of memory is installed.
Note: This information is updated monthly. Refer to the revision information below to ensure you are downloading the most recent version. Refreshing your browser may be required.
 |
Tested Memory List [PDF] |
 |
File Name: SE7221BA1-E_memlist_Rev29.pdf
Size: 196,964 bytes
Date: May 2007
File Revision: 29.0
|
Note: PDF Files require Adobe Acrobat* Reader†
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
