Intel® Server Board SDS2 - SDS2 Server Boards Assembled with Incorrect I/O Gasket [TA

Support Home

Support & Downloads

Intel® Server Board SDS2

SDS2 Server Boards Assembled with Incorrect I/O Gasket [TA_521.PDF]

A number of SDS2 server boxed boards were assembled with the incorrect I/O gasket. The incorrect I/O gasket does not have a cut out in the right corner for the system identification LED. Also, they were made with a thinner gasket material.

For further information/instructions, download the Technical Advisory below.

TA_521.PDF
Size: 317276 bytes
Date: 1/30/2002 9:16:18 AM

Note: PDF Files require Adobe Acrobat* Reader^†

^† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:

Intel® Server Board SDS2

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.

Solution ID: CS-006814
Date Created: 12-Nov-2003
Last Modified: 07-Nov-2005