This document provides instructions for installing the following accessory kits:
AXX25DRVADPTR

Use the instructions in this Hard Drive Carrier Kit Installation Guide to assemble a 2.5" hard drive into the carrier kit and then install into a 3.5" hard drive hot swap bay in the Intel® chassis and server system.

Refer to your server system user guide or service guide for how to install a hot swap hard drive carrier into the system.

Refer to web link below for compatible Intel® chassis and system list. http://www.intel.com/support/motherboards/server/sb/CS-030726.htm.

Refer to your server board documentation to determine SSD/SAS/SATA support for your server system. If you want to use your SSD/SAS/SATA drives for a RAID configuration, you may need to install a RAID add-in card. Refer to your server board documentation and/or your RAID card documentation for additional installation instructions and requirements.

	Installation Guide [PDF]
	File Name: E78220-002_InstallGuide.pdf Size: 598,550 byte Date: August 2009

This applies to:

Intel® Server Chassis SC5600 Intel® Server Chassis SC5650 Intel® Server System SC5650BCDP Intel® Server System SC5650HCBRP Intel® Server System SR1600UR Intel® Server System SR2600UR Intel® Workstation System SC5650SCWS