Support Home



Search
Support & Downloads
Server Products
Server Products
No-boot with Intel® Server Chassis SC5300 Base Power Supply

Symptom(s):
When installing the system with an Intel® Server Chassis SC5300 (SC5300 Base SKU only) Power Supply, the server system fails to boot up.

Cause:
Intel® Server Board SE7320SP2 or SE7525GP2 cannot be powered on by the C44675-007 Power Supply, which is shipped together with Intel® Server Chassis SC5300 (SC5300 Base SKU only).

Solution:

  1. Download FRUSDR 1.47 or higher and extract to a floppy diskette.
  2. Plug rear system fan to CPU#1 fan header on the server board.
  3. Power on system and upgrade FRUSDR with the floppy diskette created in step 1.
  4. Power down system and unplug rear system fan from CPU#1 fan header, and re-connect to correct system fan header.
  5. Power on system. The system should boot up properly.

This applies to:
Intel® Server Board SE7320SP2
Intel® Server Board SE7525GP2
Intel® Server Chassis SC5300

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-020669
Date Created: 30-Mar-2005
Last Modified: 13-Nov-2009
Back to Top