Server Products - Memory Cooling Kit is required with 1GB and higher of total system memory

Support Home

Support & Downloads

Server Products

Memory Cooling Kit is required with 1GB and higher of total system memory

If one or more memory modules are used and total system memory is 1 GB or higher on Intel® Server Board SE7320SP2 and Intel® Server Board SE7525GP2 in either Intel® Server Chassis SC5275-E or Intel® Server Chassis SC5300 (SC5300BASE only), then the memory cooling kit FSWMEMFAN (MM# 852787) is required.

The memory cooling kit is part number FSWMEMFAN (MM# 852787), and is available from your distributor and from Industry Education’s* pay-for-spares online store.

Integration Notes: The memory fan should be connected to the SYS_FAN_1 header. For the fan to be properly instrumented it requires FRU/SDR version 1.40 or later is required.

This applies to:

Intel® Server Board SE7320SP2
Intel® Server Board SE7525GP2

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.

Solution ID: CS-012571
Date Created: 21-Jun-2004
Last Modified: 13-Nov-2009