Server Products
Server Products
Unable to enter BIOS setup or Intel® RAID BIOS Console during boot

If the Intel or OEM logo screen displays during POST, the BIOS entry or Intel® RAID BIOS console command prompts are not visible. To gain access to these prompts, you need to disable the logo screen.

Follow these steps to disable the Intel or OEM logo screen:

  1. Press F2 during boot, when the logo screen first displays.

  2. On the Main tab, change Quiet Boot from Enabled to Disabled.

  3. Go back to the top-level tabs and click the right arrow key until the Save & Exit tab displays.

  4. Select Save Changes and Exit to boot the system with the changes saved.

After your BIOS configuration is complete, to see the Intel or OEM logo screen again, reset the Quiet Boot selection to Enabled and save the changes.

This applies to:

Intel® RAID Controller RS25AB080
Intel® RAID Controller RS25DB080
Intel® RAID Controller RS25GB008
Intel® RAID Controller RS25NB008
Intel® RAID Controller RS2BL040
Intel® RAID Controller RS2BL080
Intel® RAID Controller RS3DC040
Intel® RAID Controller RS3DC080
Intel® RAID Controller RS3WC080
Intel® Server Board S1200BT
Intel® Server Board S2600CO Family
Intel® Server Board S2600CP Family
Intel® Server Board S2600GL

Solution ID: CS-034669
Last Modified: 30-Jan-2014
Date Created: 26-Jan-2014
Back to Top