Server Products
Server Products
CmdTool2 Commands for UEFI That Have Been Removed in RAID Firmware 23.7.0-003x

Some commands previously available in the Intel® RAID Command Line Tool (Cmdtool2) for UEFI have been removed. These commands do not work with RAID firmware 23.7.0-003x when installed in the Intel® RAID adapters.

The following commands were temporarily removed:

AdPAliLog
AdpEventLog
Cfgsave cfgrestore (EFI only)
fwtermlog
EncInfo
AdpInfoCompare
AdpNameRtn
LdExpansion
getLdExpansionInfo
LDSetPowerPolicy
LDBreakMirror
EFIDriverVersion
Snapshot
ELF(PFK)

The workaround is to use CmdTool2 for Windows* version or Linux* version where these commands are still functional. The commands that were removed temporarily will be added back in future RAID firmware and/or Cmdtool2.

This applies to:

Intel® Integrated RAID Module RMS25CB040
Intel® Integrated RAID Module RMS25CB080
Intel® Integrated RAID Module RMS25PB040
Intel® Integrated RAID Module RMS25PB080
Intel® Integrated RAID Module RMT3CB080
Intel® Integrated RAID Module RMT3PB080
Intel® RAID Controller RS25AB080
Intel® RAID Controller RS25DB080
Intel® RAID Controller RS25NB008
Intel® RAID Controller RS25SB008

Solution ID: CS-033624
Last Modified: 05-Nov-2014
Date Created: 20-Jun-2012
Back to Top