Server Products
Server Products
TA-983: MiniSAS-to-SATA cable SGPIO connector incompatible with HSBP

Intel has discovered a compatibility issue between the Intel® RAID Controller miniSAS-to-SATA cable SGPIO connector and the backplanes or systems listed below.

The current cable (E65899-001) for the listed RAID controllers has a 4-pin SGPIO connector. The 4-pin SGPIO connector of the E65899-001 cable cannot be plugged into the 5-pin SGPIO connector of the backplanes or systems listed above. Without the SGPIO cable connected, the listed backplane fault LED will not function with the Intel® RAID Controllers listed below.

Affected Intel® RAID Controllers: RS25DB080, RS2VB080, RS2VB040, RT3WB080, RS2SG244, RS2WG160, RS2MB044, RS2BL080, RS2BL080DE, RS2BL040, RS2WC040, RS2WC080, RMS2MH080, SRCSASJV, SRCSASRB, SRCSATAWB, SRCSASBB8I, SRCSASLS4I

Products affected

Product Product Code MM#
Intel® Server System R1304BTLSHBN R1304BTLSHBN 911688
R1304BTLSHBNNA 907658
Intel® Server System P4304BTLSHCN P4304BTLSHCN 912775
P4304BTLSHCNNA 907886
Intel® Server Chassis P4304XXSHCN P4304XXSHCN 911765
P4304XXSHCNNA 907812
Spare hot swap backplane FUP4X35HSBP FUP4X35HSBP 913595
Spare hot swap backplane FR1304HSBP FR1304HSBP 912384

Please refer to below PDF file for detail information of the technical advisory.

Technical Advisory 983 (PDF) icon
File Name: TA_0983-01.pdf
Size: 45 KB
Date: August 2011
File Revision: 1.0

Note: PDF Files require Adobe Acrobat* Reader*

This applies to:

Intel® Server Chassis P4304XXS
Intel® Server System P4304BT
Intel® Server System R1304BT

Solution ID: CS-032738
Last Modified: 25-Aug-2011
Date Created: 18-Aug-2011
Back to Top