|
Knowledgebase Article
The system Power Supply is in a degraded or in a failed state if any of the following is encountered:
- Front Panel Status LED is blinking green.
- Information regarding a failed or degraded Power Supply is written in the System Event Logs.
- In the Active System Console, under Power Supply, the status indicates "Failed".
- If the redundant PSU LED is amber (if checked physically at the back of the Chassis).
| Note |
If the redundant Power Supply is removed in the chassis, there is no alarm. Audible Alarm Beep is usually heard when HDD RAID Failure / Degraded State (When using Add-on Hardware RAID Controller ) or Memory Issues. | |
Disclaimer
Operating System:
This applies to:
| 
