Server Products
Server Products
How To Clear the CMOS on Intel® Entry Server Board SE7230NH1-E

The CMOS clear process on the Intel® Entry Server Board SE7230NH1-E and on the Intel® Server Platform SR1475NH1-E differs from other Intel® Server Boards. 

To clear the CMOS on these products, please use the following steps:

  • Shut down the server and disconnect the AC power cord from the mains socket
  • Open the chassis and move the CMOS clear jumper from the normal operation position, at pins 1 and 2 to the CMOS clear position, covering pins 2 and 3 as indicated in the following diagram.

 

  • Reconnect the AC power cord to the socket and leave the system for a few seconds.  The standby power delivered to the system at this stage will clear the CMOS.
  • Remove the AC power cord from the socket.
  • Move the CMOS clear jumper to its original position on pins 1 and 2 (see above).
  • Close the server chassis, reconnect the power and boot your system. 



Important safety information:  Please always disconnect from the main power whilst working on an open system.

Operating System:

OS Independent

This applies to:

Intel® Entry Server Board SE7230NH1-E
Intel® Entry Server System SR1475NH1-E



Solution ID: CS-022995
Last Modified: 02-Dec-2009
Date Created: 29-Jun-2006
Back to Top