If you are installing the Intel® Server Board SE7320EP2 or SE7525RP2 in an Intel® Entry Server Chassis SC5295-E you will need to change a jumper on the board to utilize the front panel temperature sensor. Move jumper J29 from pins 2-3 to pins 1-2. If you are installing the server board into an Intel® Entry Server Chassis SC5275-E or another manufacturer's chassis leave jumper J29 on pins 2-3.
In the Attention sheet (P/N C99891-003), J27 is mentioned as for the front panel temperature sensor which is incorrect. It should be J29.
This applies to: