The Intel® Server Board SE7520JR2 supports the Intel® Xeon® Processor 2.80GHz with 800MHz front side bus.
The following are the required pieces to enable interoperability.
Hardware Requirements :
- The Intel® Server Board SE7520JR2 DDR2-400 (SATA and SCSI SKUs), and the board revision should be C53661-703 or higher for the SCSI SKU and C53659-403 or higher for the SATA SKU. You can verify the Product Board Assembly (PBA) number by looking at the white sticker marking on the baseboard. The PBA number is in a format xxxxxx-xxx, where the first 6 alpha-numeric characters represents the board SKU, and the last 3 digit represent the board revision. Note : The PBA number is also printed on the boxboard label which also denotes the supported processor.
- The following Intel® Server Chassis support dual-core processors with the Intel® Server Board SE7520JR2:
- SR2400 and SR2400NA
- There are different revisions of the SR2400 chassis, those that do support dual-core processors (MM#s 877983; SR2400 and 878201; SR2400NA and those that do not (857037; SR2400 and 857228; SR2400NA). See the Intel® Server Board SE7520JR2 Spare Part & Configuration Guide for more information.
Use the current Power Budget Tool available on support to compute for the power requirements when integrating multiple peripherals.
For the latest order codes for the Intel® Server Board SE7520JR2, check the Spares and Configuration Guide.
Note:Distributors may have inventory of server board revisions and chassis that do and do not support Intel® Xeon® Processor 2.80GHz with 800MHz front side bus processors. If you are planning to integrate with dual-core processors, please be sure to specify to your distributor that you require a board revision that will support dual-core processors.
This applies to: