The Intel® Server Board SE7520AF2 supports the Intel® Xeon® Processor 2.80GHz with 800MHz front side bus.
The following are the required pieces to enable interoperability.
Hardware Requirements :
- The Intel® Server Board SE7520AF2 board revision should be -703 or higher. You can verify the Product Board Assembly (PBA) number by looking at the white sticker marking on the baseboard. The PBA number is in a format xxxxxx-xxx, where the first 6 alpha-numeric characters represents the board SKU, and the last 3 digit represent the board revision.
- Only the Intel® Server Chassis SC5300-LX SKU is the supported chassis at this time. Use the current Power Budget Tool available on support to compute for the power requirements when integrating multiple peripherals.
For the latest order codes for the Intel® Server Board SE7520AF2, check the Spares and Configuration Guide.
Distributors may have inventory of server board revisions that do and do not support Intel® Xeon® Processor 2.80GHz with 800MHz front side bus processors. If you are planning to integrate with dual-core processors, please be sure to specify to your distributor that you require a board revision that will support dual-core processors.
This applies to: