Server Products - EMI Shields May Be Difficult to Remove From the Floppy/HDD Tray

Support Home

Support & Downloads

Server Products

EMI Shields May Be Difficult to Remove From the Floppy/HDD Tray

In some systems, the EMI shield in the floppy/HDD tray may not have been completely cut through making removal of the shield for floppy drives very difficult to do. Normal removal of the EMI shield should only require light to moderate force pushing from inside of the tray and possibly light manipulation with a screw driver to break the tabs

For more information, please review the Technical Advisory.

Technical Advisory 791-1 [PDF]

File Name: TA_791-1.pdf
Size: 44,983 bytes
Date: September 2005
File Revision: Revision 1.0

This applies to:

Intel® Server Chassis SC5300
Intel® Server System SC5300AF2
Intel® Server System SC5300BD2

End of Interactive Support Disclaimer
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "Terms of use". For information on currently available Intel products, please see www.intel.com/products.

Solution ID: CS-021446
Date Created: 14-Sep-2005
Last Modified: 13-Nov-2009