Password may be requested by FRUSDR utility when running FRUSDR update. This is the password set in Mini-Baseboard Management Controller (mini-BMC) either by user or at factory.

If you do not know the required password you must clear it before you can make FRUSDR update.

In order to clear the password on a system without Intel® Management Module installed:

1. Download System Configuration utility.
2. Run the following command from DOS:
         SYSCFG.EXE  /up1  ""
3. Run FRUSDR update utility again.

In order to clear the password on a system with Intel® Management Module installed:

1. Download System Configuration utility.
2. Power off the system and remove AC power.
3. Remove Intel® Management Module.
4. Power on the system and run the following command from DOS:
         SYSCFG.EXE  /up1  ""
5. Power off the system and remove AC power.
6. Install Intel® Management Module.
7. Power on the system and run FRUSDR update utility again.

Operating System:

OS Independent

This applies to:

Intel® Entry Server Board SE7221BK1-E Intel® Entry Server System SR1425BK1-E Intel® Server Board SE7320SP2 Intel® Server Board SE7320VP2 Intel® Server Board SE7520AF2 Intel® Server Board SE7520BD2 Intel® Server Board SE7520JR2 Intel® Server Board SE7525GP2 Intel® Server System SC5300AF2 Intel® Server System SC5300BD2 Intel® Server System SR1400SYS Intel® Server System SR1435VP2 Intel® Server System SR2400SYS Intel® Server System SR2400SYSD2