Server Products
Intel® Server Board S1400FP Family
Chassis Compatibility

This page lists tested and reference chassis information for the Intel® Server Board S1400FP Family.

Tested Intel® Chassis list:
The dedicated air duct FFPUPSAD is required for use with the Intel® Server Board S2400FP for chassis listed. The Intel® Server Board S1400FP requires a passive processor heatsink solution when integrated in chassis listed.

  • Intel® Server Chassis P4304XXSHDR
  • Intel® Server Chassis P4304XXSFDR

Reference chassis list:
Third-party chassis tested for airflow against manufacturer temperature specifications for Intel® Server Board S1400FP Family. This table will be updated as new chassis are tested.

Vendor Model Chassis Type1 Power Supply2 Unpackaged Shock Test Thermal Test Level3 Drive Support4
AIC RSC-2KG Rack(2U) H/S NA 1 A and B
CI-Design NSR316 Rack(3U) H/S NA 1 A and B

1Chassis Legend:

1U = Rack (U is multiple of 1.75 inches)
2U = Rack (U is multiple of 1.75 inches)

2Power Supply: R/D = Redundant, H/S = Hot Swap Redundant

3Thermal Test Level: Intel does system level thermal testing of Intel Server Boards for all third party reference chassis listed. The server board is configured to use a generic fan control scheme that works all attached system fans at 100 percent pulse width modulation (PWM). The generic fan control scheme is set by selecting the other chassis option using the FRUSDR Configuration Utility. Intel cannot guarantee that specific system configurations remain inside maximum thermal limits if user changes or reduces the fan control PWM rate from the tested configuration.

Content in this table documents the highest level of Intel thermal testing successfully completed.

Level Board Revision Processor Maximum Speed CPU TDP Manufacturing Process Technology Number of Drives Ambient Temperature
1 All Intel® Xeon® Processor E5-2400 Sequence 2.4 GHz 95W 32nm 1 35 Celsius
2 All Intel® Xeon® Processor E5-2400 Sequence 2.4 GHz 95W 32nm 1 30 Celsius

4Driver Support: A = Docking SAS, B = Docking SATA, C = Cabled SAS / SATA

Important information and disclaimers:
This testing information is provided as a guide for the reseller in choosing chassis products compatible with Intel® Server Boards. The reseller is encouraged to test the chassis products in specific configurations.

This listing is not intended to be all inclusive, nor is it an endorsement by Intel; it represents chassis Intel has examined to date. Check with the chassis manufacturer for the latest model specifications, or to make sure a particular chassis model is adequate for the intended purpose. This list is subject to change at any time. Check this web site regularly for updates. Intel reserves the right to modify this document at any time without notice. Intel assumes no responsibility for any errors which might appear in this document, nor does it make any commitment to update the information in it. Intel disclaims any liability or obligation for damages of any kind arising out of the application or use of the information in this document.

Intel disclaims all warranties and guarantees, express, implied or otherwise, arising from or concerning the contents of this document, including, but not limited to, the warranties of merchantability and fitness for a particular purpose and any warranty of non-infringement of any intellectual property right of any third-party. Intel makes no claims of compliance with any governmental regulatory agency.

Intel does not convey any license, express, implied or statutory, by estoppel or otherwise, arising under its intellectual property rights, nor under the rights of others. This information is for reference use by PC integrators only. PC integrators are not authorized to refer to Intel testing or reporting activities in advertising or any other manner.

This applies to:

Intel® Server Board S1400FP Family

Solution ID: CS-033654
Last Modified: 20-Aug-2012
Date Created: 16-Jul-2012
Back to Top