Support Home



Search
Support & Downloads
Server Products
Intel® Entry Server Board S875WP1-E
Two Capacitors May Prevent Installation of Boxed Intel® Processor Fan

Two Capacitors May Prevent Installation of Boxed Intel® Processor Fan Heatsink
Intel® Server Board S875WP1-E, AA# CXXXXX-304, was built with two capacitors at locations C1C4 and C3C1 near the processor retention mechanism. These locations should not have been populated with capacitors. The height of the capacitors at locations C1C4 and C3C1 may prevent the fan heatsinks included with Intel boxed processors supported by server board S875WP1-E from being installed.

icon  Technical Advisory [PDF]
File Name: ta680.pdf
Size: 76,133 bytes
Date: December 2003
File Revision: TA-0680-1

Note: PDF Files require Adobe Acrobat* Reader†



  † This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.

This applies to:
Intel® Entry Server Board S875WP1-E

End of Interactive Support Announcement
These products are no longer being manufactured by Intel. Additionally, Intel no longer provides interactive support for these products via telephone or e-mail, nor will Intel provide any future software updates to support new operating systems or improve compatibility with third party devices and software products.

THESE DOCUMENTS ARE PROVIDED FOR HISTORICAL REFERENCE PURPOSES ONLY AND ARE SUBJECT TO THE TERMS SET FORTH IN THE "LEGAL INFORMATION" LINK BELOW. For information on currently available Intel products, please see www.intel.com/products.
Solution ID: CS-017071
Date Created: 17-Nov-2004
Last Modified: 22-Nov-2004
Back to Top