Intel® Server Board S875WP1-E (S875WP1LX sku only) uses the Promise* Technology PDC20319 FastTrak* S150 TX4 serial ATA controller.

Floppy Diskette:

1. Prepare a blank formatted floppy disk.
2. Get driver from either Resource CD or Download the file into a temporary directory (e.g. c:\temp).
3. Insert blank formatted floppy disk
4. Run the executable to extract the contents of the file into the disk created in step 1.

1. During the initial Setup of Windows* 2000, it is necessary to Press <F6> when prompted to install miniport drivers.
2. Insert floppy disk with drivers into server's floppy disk drive and Press <Enter> when prompted.
   (Window* 2000 Setup will display a list of available drivers)

3. Use the arrow down key and select "Win2000 Promise FastTrak S150 TX4 (tm) Controller" driver.
   (Note: Windows* 2000 will only display the first four drivers and/or operating systems in the list. Use of the arrow down key is needed to display more selection. )

4. Continue Windows* 2000 Setup.

This applies to:

Intel® Entry Server Board S875WP1-E