|
The Intel® Server Board S875WP1-E has specific requirements for the power sequencing and limits.
The power supply used must be either ATX12V or EPS12V design, otherwise the Intel® Server Board S875WP1-E will not operate.
These power supplies provide the additional power lead of 4-pin (or 8-pin) +12 volt connector.
The additional 4-pin (or 8-pin) +12V connector should be connected to the processor power connector,
otherwise the system will not boot.
Note: Do not use a standard ATX power supply. The board will not boot with a standard ATX power supply.
This applies to:
| 
