|
Many 3rd party chassis manufacturers are shipped as Intel® Pentium® 4 processor-ready supporting the additional +12 volt requirements.
The chassis power supply is equipped with one 20-pin main power cable and one 4-pin +12 volt processor cable.
The Intel® Server Board S875WP1-E is shipped with one 24-pin main power and one +12 volt processor power connectors.
Can you use the 20-pin and 4-pin connectors with the Intel® Server Board S875WP1-E?
Yes. Connect the 20-pin main power cable from the power supply into the first 20 pins of the main power connector of the server board. Connect the 4-pin +12 volt processor cable to the first 4 pins of the +12 volt processor power connector.
Note: Be sure to consider power requirements before using any power supply. The power supply should have the +3.3, +5, and +12 volt current capacity to support the server board, processor, memory, and all peripherals used in your server.
This applies to:
| 
