|
The memory module on the Intel® Server Board S845WD1-E has 2 DIMM sockets, which can hold up to 2 GB of Unbuffered ECC and non-ECC DDR200 or DDR266 memory using two 72-bit DIMM modules. The following memory features are supported:
- DDR200 and DDR266 Unbuffered ECC and non-ECC compatible 2.5V modules (in compliance with the DDR JEDEC DIMM Specification).
- DIMMs with capacity of 64MB, 128MB, 256 MB, 512 MB, 1G. Other DRAM sizes may function correctly but will not be validated.
- Minimum configuration is 64MB using one 64MB DIMM.
 Tested Memory [PDF]
File Name: s845wd1ememlistrev36.pdf
Size: 188,416 bytes
Date: October 2004
File Revision: 36.0
Please Note: The Intel® Server Board S845WD1-E Tested Memory List is valid for all Product Codes (S845WD1, S845WD11U and S845WD1H).
Note: PDF Files require Adobe Acrobat* Reader†
† This link will take you off of the Intel Web site. Intel does not control the content of the destination Web Site.
This applies to:
| 
