The Intel® RAID Controller audible alarm beeps when a drive fails and also during a rebuild.
Drive failure alarm beeps:
Failed array: Long tone, three seconds on, one second off
- Degraded array: Short tone, one second on, one second off
- Array has degraded but no data has been lost
Hot spare commissioned: Short tone, one second on, three seconds off
- Array has failed and high likelihood data has been lost
- Using hot spare in rebuild; alarm will continue during rebuild with a different sound at completion
The drive failure tones repeat until the problem is corrected, or until the alarm is silenced or disabled. The alarm can be silenced or disabled on the controller’s properties page in the BIOS Console or by using the failed drive options pane in the Intel® RAID Web Console 2.
This applies to: